Machine Data

Machine Data

These data are taken from the original Emco brochure for the mill.

Working range
X (longitudinal) 200mm
Y (transverse) 100mm (125mm on a few of the very last machines manufactured.)
Z (vertical) 200mm

Milling table
Table surface 420 x 125mm
Tee slots 2 off
Tee slot width 11
Tee slot spacing 90

Distance between spindle face and table
Vertical 25 - 225mm
Horizontal 80 - 280mm
Throat clearance 140mm

Spindle
DC motor 440 watt
Speed range F1 mill 300 to 2000rpm
Speed range WoodWorker 1200 to 8000rpm
Collets for toolholders ER25 type

Traverse rate
12 mm/min to 600mm/min (12mm/min is the minimum traverse rate with WELmill)
Feed force 1000N
Single step size 1/72mm ie. 0.01389mm

Machine weight and dimensions
Mill 120kg
Control unit 40kg
Mill dimensions 840 by 750 by 720mm
Control unit 710 by 450 by 540mm

Please note:
WELmill assumes only vertical milling. Do not turn the milling head through 90 degrees.
WELmill uses metric measurement only.
WELmill uses absolute co-ordinates only.

Machine Light
Mill Maintenance
Safety