WELedit for the Emco Compact 5CNC lathe and F1 Mill

WELedit is the NC code editor for the Emco Compact 5 CNC Lathes CPU-AGC114003 (Mark 2) and CPU-AGC114004 (Mark 4) as well as the Emco F1 Mill CPU-F1A114001 (Metalworker and Woodworker)

Click on the image above for expanded view

• Assisted entry of NC code with the ability to include a comment on any line.
• Point-and-click selection of G-codes and M-codes.
• WELedit knows which parameters are required for each G or M code. It also knows the acceptable range for the parameter values and will not accept out-of-range values.
• When entering a new line of code, WELedit presents the parameter values of the most recent preceding line with the same G or M code to avoid unnecessary re-keying.
• WELedit manages the line numbering, automatically renumbering whenever lines are inserted or deleted. It prevents you from creating more than the maximum numbers of lines of code the mill or lathe can handle.
• All comments, including the general text that can be added at the bottom of the screen, are saved when the file is saved to disk. They are printed when the Print function in the File menu is selected.
• Code is transferred between the PC and the lathe or mill, using a special serial cable connected to Com 1 or Com 2 on the PC. (This function is only available in the registered version).

WELsoft also supplies a ready made cable for WELedit to connect from the PC to the Lathe or Mill. Please see our prices page.